Milkyway Circuitboard Wet Ash Catcher

Why Do These Specifications Matter For Your Setup?

Understanding the details helps you get the perfect fit and function for your water pipe. Each specification is chosen to improve your experience, from how it fits to how it performs.

• Specs like joint size, angle, and material directly affect fit, stability, and durability.
• The borosilicate glass construction ensures it resists heat and lasts a long time.
• Choosing the right joint size and angle is vital for a stable, airtight seal.
• The 5-inch height adds good filtration without unbalancing your water pipe.

Getting the right fit is the most important step. An incorrect size or angle will make your setup unstable. Use this guide to perfectly match the ash catcher to your water pipe.

Should I Get A 45 Or 90 Degree Ash Catcher?

The angle of your ash catcher must match the angle of the joint on your water pipe. This keeps the catcher sitting straight and prevents spills.

• Choose 45°: If you have a beaker-style or slanted-joint water pipe. The 45-degree angle makes sure the ash catcher stands vertically.
• Choose 90°: If you have a straight-tube water pipe or a rig with a joint that points straight up at a 90-degree angle.

How Do I Know If I Need a 14 mm or 18 mm Joint?

This ash catcher has a male joint, which fits into a female joint on your water pipe. Match the size for an airtight seal. If you are not sure of your water pipe's joint size, a 14mm joint is about the size of a pinky finger, while an 18mm is closer to the size of an index finger.

• Match the angle to your water pipe's joint (45° for beakers, 90° for straight tubes) and the joint size (14mm/18mm).
• Use a 45° angle ash catcher for water pipes with slanted joints, like most beaker bongs.
• Use a 90° angle ash catcher for water pipes with vertical joints, common on straight tubes.
• This ash catcher has a male joint; make sure your water pipe has a matching female joint (or use an adapter if needed).

Beyond its main job, the Circuitboard ash catcher includes design upgrades that make it a centerpiece accessory.

What Is The Sandblasted Circuitboard Design?

The whole piece is wrapped in a detailed circuitboard pattern. This is not a sticker or decal; it is sandblasted directly into the glass. This etching process creates a premium, frosted texture that feels great in your hand and will not fade or peel. It adds a high-tech look to your glass collection.

How Does The Internal 'Lungs Chip' Work?

As part of our signature series, we've included our custom 'lungs chip' inside. This special diffuser is designed to improve water agitation and airflow. It helps break down smoke into smaller bubbles for better cooling and filtering, all without adding much drag to your pull.

• The sandblasted pattern provides a premium look and feel, while the 'lungs chip' improves filtration.
• The circuitboard design is sandblasted for a durable, textured, and high-quality finish.
• Our special 'lungs chip' is a fixed diffuser that improves cooling and filtration power.
• These features combine better function with a standout visual style.

Setting up your new ash catcher is quick and easy. Follow these steps for the best performance and to avoid issues like splashback.

How Much Water Should I Put In It?

1. Connect Securely: First, be sure the ash catcher is clean. Gently connect its male joint to the female joint of your water pipe.
2. Add Water: Carefully add a small amount of cold water into the ash catcher. The best water level is just enough to cover the diffuser slits, usually about 1/4 to 1/3 full.
3. Check the Level: Too much water will cause it to splash into your mouth or your main piece. Add just enough for good filtration.
4. Test the Pull: Before packing your bowl, take a gentle test pull. If you get water in your mouth, pour a little out and try again.
5. Pack and Use: Once the water level is right, pack your bowl on the ash catcher and use it as you normally would.
6. Rinse After Session: For best results, empty the dirty water and rinse the ash catcher after each session for easy cleaning.

• Use a small amount of water to cover the diffuser, test your pull before use, and rinse it after each session.
• Add just enough water to submerge the diffuser slits, which helps prevent splashback.
• Always do a test pull without herb to check that the water level is correct.
• Rinsing the ash catcher with hot water after you use it prevents resin from building up.

Are you wondering if a wet ash catcher is the right choice for you? Here’s a quick comparison to other common options.

Is A Wet Ash Catcher Better Than A Dry One?

• A wet ash catcher gives you the best of both: excellent cleaning power and added smoke cooling.
• Wet ash catchers are great at trapping debris and cooling the smoke.
• Dry catchers keep your piece clean but do not offer extra filtration or cooling.
• Compared to using no catcher, a wet ash catcher is a major upgrade for both cleanliness and smoothness.

Keeping your Circuitboard ash catcher clean is simple. Doing so ensures the sandblasted design stays looking sharp for years.

What Is The Best Way To Clean Sandblasted Glass?

The key is to avoid rough materials that could wear down the textured finish. The classic isopropyl alcohol (ISO) and salt method works perfectly with one small change: use a finer grain of salt. Fill the ash catcher about 1/3 full with 91%+ ISO and add a teaspoon of fine-grain table salt. Plug the openings and shake gently for 1-2 minutes. The salt will gently scrub the inside while the ISO dissolves the resin. Rinse well with warm water, and it will look good as new.

• Clean it with isopropyl alcohol and fine-grain salt to protect the sandblasted finish.
• Use 91% or higher isopropyl alcohol and a fine-grain salt.
• Avoid coarse rock salt or abrasive brushes on the outside to protect the etched design.
• Rinsing it regularly after use makes deep cleaning much less necessary.

• Confirm Joint Angle: Check if your bong is 45° (beaker) or 90° (straight tube).
• Confirm Joint Size: Verify your bong's female joint is 14mm or 18mm.
• Check for Stability: After connecting, make sure your setup is stable and not top-heavy.
• Add Minimal Water: Put in just enough to cover the diffuser slits.
• Perform a Test Pull: Check for splashback before you add any material.
• Plan for Cleaning: Have ISO and fine salt ready for future maintenance.

The Circuitboard Wet Ash Catcher is a fantastic starting point for improving your setup. If you are looking for other styles or sizes, check out our full range of glass accessories.

• Shop the full Ash Catchers Collection