Where can I find downstems specifically?

Downstems have their own dedicated Downstems collection, so you don’t have to dig through every part to find one. It groups glass, aluminum, and silicone styles, with joint options like 14mm to 14mm, 18mm to 14mm, and 18mm to 18mm. Measure your old downstem first so the new one sits at the right depth in the water.

What’s the difference between a dry and a wet ash catcher?

A dry ash catcher has no water inside. It simply traps ash and debris before they reach your bong. A wet ash catcher holds water and usually a percolator, like a tree or honeycomb perc. That gives your smoke one more filter. Dry styles stay lighter, while wet styles give you more filtration.

What joint size do I need for bong parts?

You need parts that match your bong’s joint, which is usually 10mm, 14mm, or 18mm. Small bongs and bubblers under 8 inches often use 10mm. Most bongs from 8 to 16 inches use 14mm, and bigger pieces use 18mm. For a quick test, a dime fits inside an 18mm joint but not a 14mm one.

Where can I find bong bowls specifically?

Bong bowls live in the Bowls, Downstems and Adapters collection, next to matching downstems and glass adapters. That makes it easy to replace a bowl and the parts around it in one order. You’ll find glass, stainless steel, and slide styles there. Check your joint size and gender first, so the bowl seats snugly.

Can I mix and match bong parts from different brands?

Yes, in most cases. Fit matters more than brand, so focus on joint size and gender. Joints come in standard 10mm, 14mm, and 18mm sizes. So a 14mm male bowl from one brand fits a 14mm female joint from another. If two pieces don’t line up, a glass adapter or joint reducer can connect them.

Bong Parts & Accessories: Ash Catchers & More

Bong parts are the swappable pieces that connect to your bong’s joint, from bowls and downstems to glass adapters. This page holds the bong accessories and attachments that keep your setup clean, including dry and wet ash catchers, reclaim catchers, and joint reducers. Every part has to match your joint size (10mm, 14mm, or 18mm) and joint gender to fit.

Where to Find the Right Bong Parts Fast

DankStop gives a few popular parts their own collection, so you can jump straight to a focused selection. Use this table to pick the right shelf.

Looking for	Where to go
A downstem for your bong	Downstems
A bong bowl with a matching downstem or adapter	Bowls, Downstems and Adapters
A glass adapter for a size or gender change	Glass Adapters
Ash catchers, reclaim catchers, joint reducers, and device attachments	Right here, in the product grid on this page

If a part doesn’t have its own shelf, it stays here.

What Are Bong Parts and Accessories?

Bong parts and accessories are the removable pieces that load, filter, or connect your setup. Bowls hold your dry herb. Downstems carry smoke under the water. Ash catchers and adapters add filtration or change how two pieces connect. None of them work alone, so each part needs a matching joint to fit.

Types of Bong Accessories and Attachments

There are six main types of bong attachments, and each one does a different job.

Bong Bowls

A bong bowl is the piece that holds your dry herb and controls the size of each hit. Bong bowls come in glass and stainless steel, with styles like handled bowls, screen bowls, and pull-stem slides. Not sure which size fits? The guide to bong bowl sizes for 10mm, 14mm, and 18mm joints compares each one to everyday objects.

Downstems

A downstem is the tube that carries smoke from the bowl down into the water. Without one, your bong has no water filtration. A bong downstem comes in glass, aluminum, or silicone, with straight, slitted, or showerhead tips. The tip should sit 0.5 to 1.5 inches below the water line. Picking a downstem for bong setups comes down to two numbers: joint size and length. The guide on how to measure and buy a downstem shows an easy pencil method for both.

Ash Catchers

An ash catcher is an attachment that sits between your bowl and your bong to trap ash before it reaches the water. Your bong water stays cleaner for longer. Ash catchers come with 45-degree or 90-degree joints, so check the angle of your bong’s joint before you buy. For more perc styles side by side, the Ashcatchers collection lines up tree, honeycomb, and showerhead designs.

Reclaim Catchers

A reclaim catcher is an adapter that collects sticky residue before it runs into your piece. Some styles use a silicone base.

Glass Adapters and Joint Reducers

A glass adapter is a borosilicate connector that lets two pieces with different joint sizes or genders fit together. Adapters convert between 10mm, 14mm, and 18mm joints, and between male and female ends. A joint reducer steps a larger joint down so a smaller part fits. Dropdowns and angle adapters change where your bowl sits.

Device Attachments

Device attachments connect glass to electronic pieces. Options include glass attachments for the PuffCo Proxy and vape pen adapters.

How to Choose Bong Parts That Fit Your Setup

Choosing bong parts comes down to four checks, in this order:

Measure the joint size. Most bongs use a 10mm, 14mm, or 18mm joint. A quick test: a dime fits inside an 18mm joint but not a 14mm one.
Match the joint gender. Always pair opposite genders. A male bowl needs a female joint, and a female piece needs a male one.
Pick a material. Glass is the standard for clean flavor. Titanium lasts the longest, ceramic falls in between, and silicone bends instead of breaking.
Watch the weight. Stacking several attachments makes your bong top-heavy. Keep the setup balanced so it stays upright on the table.

Dry Ash Catcher vs. Wet Ash Catcher

A dry ash catcher traps ash without water, while a wet ash catcher adds water and a percolator for extra filtration. Here is how the two compare.

Feature	Dry ash catcher	Wet ash catcher
Water inside	No	Yes
What it does	Traps ash and debris	Traps ash and filters smoke through a perc
Perc styles	None	Tree, honeycomb, showerhead, turbine, fritted disc
Weight on your bong	Lighter	Heavier once filled
Water to change	No	Yes

Go dry for a light, simple add-on. Go wet for smoother hits from an extra stage of water.

How to Clean and Care for Bong Accessories

Bong accessories last longest when you handle them gently and clean them often. Thin glass can crack if it gets knocked around. Take each part off the bong before you clean it, so residue can’t build up in the joints.

Cleaners, brushes, and caps from the cleaning supplies range make the job quick.

Confirm your age

Sorry!

Bong Parts, Accessories & Attachments